86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


Anping sanlian filtering equipment Co.,LTD

Products >> water-based polyurethane adhesive

water-based polyurethane adhesive

Build Your Online Product Catalogs?



Description
Product Name: water-based polyurethane adhesive
Supply Ability: 10000000T
Related proudcts glue, adhesive, polyurethane,
Specifications Products Meet International Standards
Price Term: FOB
Port of loading: tianjin
Minimum Order 1T
Unit Price: 0.788

Glue liquid adhesive
Features:
1. Room temperature curing adhesive.
2. Anti-wear and oil resistance
3. Good adhesiveness for mental and paper
4. I***ct resistance, stripping resistance, anti-vibration and anti-fatigue
5. Environmentally friendly products.
Physical Nature:
Appearance: material-A is translucent liquid, material-B is dark liquid
Viscosity: 30£­45kps.s
Bond strength: Initial bonding strength 20£­21KN/CM2
Peel strength:40£­48KN/CM2
Usage:
1. The surface of end cap is supposed to be washed clean for getting rid of oil stain and dust, and dried completely. Any oil stain, water or other impurities should not exist on the surface, or the adhesive strength will be affected.
2. Before the charge mixture, material-A in the barrel should be stirred or inverted, material-A and material-B are mixed at the mixture ratio of 2:1, per kilogram of material-A to join 2 kilograms of talcum powder. And stirred evenly.
3. Inject appropriate adhesive into the end cap and wait for a moment. The adhesive should be smeared evenly on every corner of cap surface.
4. Insert filter paper (or central tube) into the end cap and check the surfaces of two adhesive pieces. After complete contact, give a little pressure on the top of end cap and hold for a moment.
5. After curing for around four hours, reverse and adhere the other end cap. It can be packaged when complete drying after 24 hours and used after five days.
In the experimental test which resistance to high oil temperature£¬ It have shown that the use of this adhesive paste in the filter was soaked in oil £¨at high temperature of 135 ℃ or low temperature of -35 ℃£©for 192 hours, no shrinkage crack or degumming.

Contact Us
Company: Anping sanlian filtering equipment Co.,LTD
Contact: Ms. susan zhang
Address: anping county
Postcode: 053600
Tel: 86-318-7850506
Fax: 86-318-7524169
E-mail:         


Copyright© Anping sanlian filtering equipment Co.,LTD All Rights Reserved.
Tel : 86-318-7850506 Fax : 86-318-7524169
Powered by 86exporter.com